f30 wing mirror retrofit notes

Retrofitting dimming and folding mirrors requires 2 cables to passenger mirror.  LIN bus and power.

Old mirror pin layout (6 pins)

  1. Mirror Heating  –> not used
  2. Turn Indicator –> Pin 2
  3. Ground –> Pin 3
  4. Vertical Adjustment –> not used
  5. Ground –> Pin 4
  6. Horizontal Adjustment –> not used

New mirror pin layout (5 pins)

  1.  Empty
  2. Turn Indicator
  3. Turn Indicator Ground
  4. Ground (heating and folding)
  5. LIN bus
  6. Power

I’ve connected LIN from A173*4B Pin 27 which was already empty. I ran the cable to the mirror. And for power I used the rear fuse box. The missing ground cable is connected to pin 3.

Driver’s side is plug and play.  Install your new mirror and window switch.

After finishing connections add 430 to FA and code FEM VO.

Enjoy.

One thought on “f30 wing mirror retrofit notes”

  1. Hi, i’m Looking to retrofit 2 electric folding door mirrors to a 2016 330e Sport. I need the 2 mirrors, a new door switch plus two cables for the passenger door? Do you know where I can get these cables, and clear step by step installation instructions? Any help or advice would be greatly appreciated.

    Tks. Dave

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.